Here you will find answers to the most frequently asked questions about our services.
The production of the mould takes about 1 to 1.5 months. After receiving the mould, we can provide the first sample within three to four weeks (if no post processing is required).
No, but the minimum order quantity may depend on the number of parts you need. However, we can suggest an economically reasonable order quantity during the DFM discussion.
We are able to produce more than 1 million units per month.
Metal injection moulding is a process for producing metal parts by mixing metal powder and binder: the mixture is injected into a mould and then sintered in a degreasing and sintering furnace.
The metal injection moulding or MIM process is suitable for the mass production of complex shaped metal parts. Micro metal injection moulding or μ-MIM® is a special MIM process for the mass production of small and intricately shaped metal parts.
It depends on your requirements, but we recommend a minimal finishing strategy. If you want a mirror or a surface with thread lines, we can add the finishing.
The Ra value depends on the type of metal material and particle size distribution, but ranges from 0.2 to 1.6 μm.
Schedule a free initial consultation with one of our experts
We will gladly answer your open questions and show you how we can help you solve your technical challenges.